Introduction:
Are you experiencing calibration issues with your SimSpray unit? Don't worry, we're here to help! In this article, we'll walk you through some common troubleshooting steps to resolve calibration issues and ensure smooth operation of your SimSpray system.
Issue Description:
One of the most common causes of calibration issues is incorrect placement of the gun and helmet during setup. Typically, these should be positioned approximately 4 feet away from the project when loading. If they are too close or too far away, it can affect the calibration process and lead to inaccuracies in the simulation.
Solution 1:
Adjust Gun and Helmet Placement:
To resolve this issue, ensure that the gun and helmet are held approximately 4 feet away from the project during loading. This optimal distance helps the SimSpray system calibrate accurately and ensures proper simulation results.
Solution 2:
Reset Space:
If adjusting the gun and helmet placement does not resolve the calibration issue, you can try resetting the space within the SimSpray software. Follow these steps:
- Navigate to the SimSpray drop-down menu in the monitor's top left corner when painting.
- Select the "Reset Space" option from the menu.
- The system will prompt you to place the gun on the floor, approximately 6-8 feet away from the SimSpray unit and in the middle of both cameras.
- Hold the gun and helmet rather than setting them on the floor to prevent any damage.
- Follow the on-screen instructions to select the room size. The default option (room shape A) should suffice for most setups.
Conclusion:
By following these troubleshooting steps, you should be able to resolve calibration issues effectively with your SimSpray unit. Remember to always ensure proper placement of the gun and helmet during setup and utilize the "Reset Space" feature if needed. If you continue to experience issues, feel free to contact our support team for further assistance.
We hope this article has been helpful in resolving your SimSpray calibration issues. Thank you for choosing SimSpray for your training needs!
Note: The instructions provided in this article are based on the assumption that the user is familiar with operating the SimSpray system. Please refer to the user manual or contact our support team for personalized guidance if you require additional assistance.