Roland BT- Cleaning the Maintenace Unit

Roland BT- Cleaning the Maintenace Unit

Introduction

Regular maintenance of the Maintenance Unit is crucial for your machine's optimal performance and longevity. Follow these steps to clean the Maintenance Unit properly.

Steps to Clean the Maintenance Unit

  1. Access the Maintenance Menu

    • Press the [▼/Menu] key.
    • Use the [▲] or [▼/Menu] key to navigate to [Maintenance].
    • Press the [#Enter] key.

  2. Select Clean Maint Unit

    • Press the [▲] or [▼/Menu] key to select [Clean Maint Unit].
    • Press the [#Enter] key.
    • Wait while "Maintenance in process..." is displayed.

  3. Open the Top Cover

    • When the display shows "Open Top Cover to clean unit," open the top cover.
    • The Maintenance Unit will move to a cleaning position, and the printer's power will turn off automatically.

  4. Clean the Maintenance Unit

    • Wipe off any dirt in the area shown in the figure using the cleaning stick moistened with the cleaning liquid. For the top part of the cap, wipe gently.
    • Wipe the side part, top part, and inner part of the cap until all the solidified ink is removed.

  5. Close the Top Cover

    • After cleaning, close the top cover.
    • Head-cleaning will start after restart, returning the machine to its usual condition.

Warnings and Precautions

  • Do Not Touch: Avoid touching the toothed rubber belt or ink tubes during cleaning. Ensure your sleeves do not get caught in cables or ink tubes.
  • Cleaning Tools: Clean the maintenance unit with the cleaning stick; do not use a cleaning cloth.
  • Dropping Tools: Do not drop the cleaning stick into the machine.
  • Automatic Maintenance: If you haven't cleaned the print head nozzles, proceed to clean them as well.

Conclusion

These steps ensure your machine's Maintenance Unit is cleaned effectively, maintaining optimal printing performance and preventing potential issues. Regular cleaning, as prompted by the machine, is essential for smooth operation.


    • Related Articles

    • Roland - BT-12 Cleaning the Internal Ink System

      Introduction Cleaning your machine's internal ink components is crucial to maintaining optimal performance and prolonging its life, especially if it has not been used for an extended period. Follow these steps to ensure a thorough internal cleaning. ...

    • Roland DGA -Troubleshooting Printing Issues with Roland VersaSTUDIO BT-12

      Are you experiencing printing issues with your Roland VersaSTUDIO BT-12? Don't worry, we've got you covered. Here are some common problems you might encounter and how to resolve them. Problem: Faint or Uneven Printing Possible Causes: Unclean ...

    • Roland DGA - TruVis Maintance Guide

      The amount of maintenance required varies according to printer usage. As a minimum requirement, Roland recommends “Manual preventative cleaning at least once a week” and “wiper replacement when prompted by the machine”. They are easy 10 minute jobs. ...

    • Roland DGA - Replacing a Captop SG/VG

      Introduction: Ensuring consistent and high-quality prints is essential for any printing operation. One crucial component in achieving this goal is the cap top, which plays a vital role in preventing ink clogs and maintaining the integrity of your ...

    • Roland DGA - Resolving Color Discrepancies when Printing from Adobe Illustrator with VersaSTUDIO BT-12

      In the vibrant community of Versa STUDIO BT-12 owners, users frequently engage in the Facebook BT-12 Users Group to share ideas and feedback and even troubleshoot issues. Recently, a user encountered a color problem while printing from Adobe ...